How High Does A Meter Base Have To Be. Screw the conduit mast tightly into the hub of the meter base. The readings can also be listed as rate 1 and rate 2, or rate 1 and rate 4.
It is popular for converted properties or buildings which don’t have a cavity wall. Where gas meters and related equipment are not located in a separate room but are located in an open floor area, no combustible material shall be stored or kept within 5 feet (1524 mm) of such equipment; Scoop out about three inches of dirt under the meter base to make a shallow hole.
Only one set of conductors shall be allowed under the lugs of a 200 amp meter It can also lead to overheated terminals on the meter itself. One metre is exactly equivalent to 5 000 / 127 inches and to 1 250 / 1 143 yards.
1 metre is nearly equivalent to 3 feet 3 + 3 ⁄ 8 inches. Now look forward to the next step. The minimum height required for an electric meter box is four feet from the bottom of the meter to the ground level.
Meter bases rated for a maximum of 200 amps or a maximum of 320 amps for overhead and underground services. This is your first reading. If there have no voltage sign at all, then it’s completely done.
♦ do not put the meter at the back of the house. Drive the ground rod into the hole in the ground directly under the meter base using the sledgehammer until the rod only has a few inches left above the bottom of the hole. Step 2 open a knock out on top of the meter box to fit the riser pole width.
This installation can accommodate three sizes of gas meter: A near suicidal 100ft (30m) seems to be about the limit. It is popular for converted properties or buildings which don’t have a cavity wall.
Comments
Post a Comment